ALDRICH CHEMICAL CO -- ACENAPHTHENE, 99%, 21537-6 -- 6810-00N040297
===================== Product Identification ===================== Product ID:ACENAPHTHENE, 99%, 21537-6 MSDS Date:07/23/1992 FSC:6810 NIIN:00N040297 === Responsible Party === Company Name:ALDRICH CHEMICAL CO Box:355 City:MILWAUKEE State:WI ZIP:53201 Country:US Info Phone Num:414-273-3850 Emergency Phone Num:414-273-3850 CAGE:60928 === Contractor Identification === Company Name:ALDRICH CHEMICAL CO INC Address:1001 WEST ST PAUL AVE Box:355 City:MILWAUKEE State:WI ZIP:53233 Country:US Phone:414-273-3850 CAGE:60928 ============= Composition/Information on Ingredients ============= Ingred Name:ACENAPHTHENE CAS:83-32-9 RTECS #:AB1000000 Fraction by Wt: 99% EPA Rpt Qty:100 LBS DOT Rpt Qty:100 LBS ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: MAY BE HARMFUL BY INHALATION, INGESTION OR SKIN ABSORPTION. CAUSES EYE AND SKIN IRRITATION. MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT. TO THE BEST OF MFR KNOWLEDGE, THE CHEMICAL, PHYSICAL, AND TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES: IMMED FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES & SEEK MED ADVICE. SKIN: IMMED WASH SKIN WITH SOAP AND COPIOUS AMOUNTS OF WATER. WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT MOUTH WITH WATER PROVIDED PERSON IS CONSCIOUS. CALL A PHYSICIAN. ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR APPROPRIATE FOAM. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL DRY PLACE. AVOID CONTACT AND INHALATION. DO NOT GET IN EYES, ON SKIN/CLTHG. IRRITANT. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR. Ventilation:MECHANICAL EXHAUST REQUIRED. Protective Gloves:RUBBER GLOVES. Eye Protection:CHEMICAL SAFETY GOGGLES. Other Protective Equipment:SAFETY SHOWER AND EYE BATH. WEAR SUITABLE PROTECTIVE CLOTHING. Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:534F,279C Melt/Freeze Pt:M.P/F.P Text:199F,93C Vapor Pres:10@131C Vapor Density:5.32 Appearance and Odor:PALE-YELLOW NEEDLES. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE, CARBON DIOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISSOLVE/MIX MATERIAL WITH A COMBUSTIBLE SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS . Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.