PIERCE & STEVENS -- HYBOND 80 -- 8040-00F005186
===================== Product Identification ===================== Product ID:HYBOND 80 MSDS Date:08/16/1988 FSC:8040 NIIN:00F005186 === Responsible Party === Company Name:PIERCE & STEVENS Box:1092 City:BUFFALO State:NY ZIP:14240 Info Phone Num:(716) 856-4910 Emergency Phone Num:(716) 856-4910 CAGE:77282 === Contractor Identification === Company Name:PIERCE & STEVENS Box:City:BUFFALO State:NY ZIP:14240 Country:US Phone:716-856-4910 CAGE:77282 ============= Composition/Information on Ingredients ============= Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III) CAS:78-93-3 RTECS #:EL6475000 Fraction by Wt: 30% OSHA PEL:200 PPM/300 STEL ACGIH TLV:200 PPM/300STEL 9192 EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:BENZIN, NAPHTHA CAS:8030-30-6 RTECS #:DE3030000 Fraction by Wt: 5% Other REC Limits:STEL 400 PPM OSHA PEL:500 PPM ACGIH TLV:300 PPM Ingred Name:HEXANE (N-HEXANE) CAS:110-54-3 RTECS #:MN9275000 Fraction by Wt: 15% OSHA PEL:500 PPM ACGIH TLV:50 PPM; 9293 EPA Rpt Qty:1 LB DOT Rpt Qty:1 LB Ingred Name:C6 HEXANE ISOMERS Fraction by Wt: 20% ACGIH TLV:500 PPM Ingred Name:SILICA AMORPHOUS HYDRATED, SILICEOUS EARTH, FUMED SILICA CAS:112945-52-5 RTECS #:VV7310000 Fraction by Wt: <5% Other REC Limits:20 MPPCF OSHA PEL:80 MG/CUM (%SIO2+2) ACGIH TLV:5 MG/CUM Ingred Name:TOLUENE (SARA III) CAS:108-88-3 RTECS #:XS5250000 Fraction by Wt: 10% OSHA PEL:200 PPM/150 STEL ACGIH TLV:50 PPM; 9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INGESTION: GASTROINTESTINAL IRRITATION, NAUSEA/VOMITING. INHALATION: NOSE OR THROAT IRRITATION. HIGH CONCENTRATIONS MAY CAUSE CNS DEPRESSION, HEADACHES, DIZZINESS, CONVULSIONS & INCREASES THE POTENTIA L FOR N-HEXANE TO CAUSE NEUROTOXIC EFFECTS. EYE/SKIN: MAY CAUSE IRRITATION & DEFATTING. Explanation of Carcinogenicity:NONE Effects of Overexposure:ASPIRATION OF MATERIAL INTO LUNG MAY CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. PROLONGED/REPEATED OVEREXPOSURE TO SOLVENTS CAUSES PERMANENT BRAIN, LIVER, KIDNEY, SPLEEN, & PERIPHERAL NERVOUS SYST EM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING/INHALING THE CONTENTS MAY BE HARMFUL OR FATAL. Medical Cond Aggravated by Exposure:KIDNEY, LUNG, SPLEEN & PERIPHERAL NERVOUS SYSTEM DAMAGE. ======================= First Aid Measures ======================= First Aid:INGESTION: DON'T INDUCE VOMITING. CALL POISON CONTROL CENTER, INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION. KEEP WARM/QUIET. GET MED ATTN. EYE: FLUSH W/LARGE AMTS OF WATER. GET MED ATTN. SKIN: REMOVE CONTAMINATED CLOTHING. WASH AFFECTED AREA W/SOAP & WATER. ===================== Fire Fighting Measures ===================== Flash Point:9F CALCULATED Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS CO2, ALL PURPOSE DRY CHEMICAL OR ALCOHOL FOAM. POLYMER FOAM IS PREFERRED. Fire Fighting Procedures:WEAR SCBA. WATER MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE. Unusual Fire/Explosion Hazard:VAPORS MAY CAUSE FLASH BACK TO SOURCE OF IGNITION. WATER MAY BE USED TO COOL EXPOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP/POSSIBLE AUTO-IGNITION/EXPLOSION. ================== Accidental Release Measures ================== Spill Release Procedures:ELIMINATE IGNITION SOURCE FLAMES, HOT SURFACES, ELECTRICAL EQUIPMENT, STATIC DISCHARGE/SPARKS. DIKE/CONTAIN SPILL W/INERT MATERIAL (SAND/EARTH). TRANSFER LIQUIDS TO COVERED METAL CONTAINERS FOR DISPOS AL W/INERT ABSORBENT. USE ONLY NON-SPARKING TOOLS. ====================== Handling and Storage ====================== Handling and Storage Precautions:DON'T STORE >90F. DON'T TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. EMPTY CONTAINERS MUSTN'T BE WASHED/RE-USED FOR ANY PURPOSE. Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN TRANSFERRING. DON'T STORE >95F. NEVER USE PRESSURE TO EMPTY. DON'T WELD, BRAZE OR CUT ON EMPTY CONTAINER. HAZARD CLASS: FLAMMABLE LIQUID; UN1133. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IF TLV OF PRODUCT IS EXCEEDED, USE A PROPERLY FITTED NIOSH/MSHA APPROVED RESPIRATOR W/AN APPROPRIATE PROTECTION FACTOR. IN CONFINED AREAS USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR. Ventilation:PROVIDE LOCAL EXHAUST/MECHANICAL VENTILATION TO KEEPAIR Evaporation Rate & Reference:SLOWER THAN ETHER Percent Volatiles by Volume:86% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG ACIDS OR ALKALINE MATERIALS. Stability Condition to Avoid:IGNITION SOURCES, FLAMES, HOT SURFACES, ELECTRICAL EQUIPMENT, STATIC DISCHARGE, SPARKS, & HEAT. DON'T STORE >95F. Hazardous Decomposition Products:CO2, CO, SMOKE, HYDROGEN, CHLORIDE. Conditions to Avoid Polymerization:ELEVATED TEMPERATURES. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS. FLAMMABLE MATERIALS. THIS PRODUCT, IF DISCHARDED DIRECTLY, RCRA CLASSIFICATION HAZ. WASTE D001 BASED ON ITS IGNITABILITY HAS FLASH POINT OF 140F OR LESS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.