MALLINCKRODT, INC., SCIENCE PRODUCTS DIVISION -- SODIUM HYDROXIDE -- 6810-00-101-7584
===================== Product Identification ===================== Product ID:SODIUM HYDROXIDE MSDS Date:11/03/1985 FSC:6810 NIIN:00-101-7584 === Responsible Party === Company Name:MALLINCKRODT, INC., SCIENCE PRODUCTS DIVISION Address:PARIS BYPASS Box:M City:PARIS State:KY ZIP:40361 Country:US Info Phone Num:314-982-5000 Emergency Phone Num:314-982-5000 CAGE:DO886 === Contractor Identification === Company Name:MALLINCKRODT SPECIALTY CHEMICALS CO Address:222 RED SCHOOL LANE Box:City:PHILLIPSBURG State:NJ ZIP:08865 Country:US Phone:908-859-2151 CAGE:62910 Company Name:MALLINCKRODT, INC. Address:NONE SPECIFIED BY MANUFACTURER. Box:M City:PARIS State:KY ZIP:40361 Country:US Phone:314-982-5000 CAGE:DO886 ============= Composition/Information on Ingredients ============= Ingred Name:SODIUM HYDROXIDE (SARA III) CAS:1310-73-2 RTECS #:WB4900000 Fraction by Wt: 100% OSHA PEL:2 MG/M3 ACGIH TLV:C 2 MG/M3; 9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES Health Hazards Acute and Chronic:ACUTE:CORROSIVE TO ALL BODY TISSUES;MAY DAMAGE TISSUES;IRRITATION,BURNS OR BLINDNESS OF EYES;SKIN BURNS,SCARRING; IRRITATION OF RESPIRATORY TRACT AND G.I. TRACT;MAY DAMAGE LUNGS & G.I. SYSTEM CHRONIC: DERMATITIS;LUNGS & G.I. TRACT DAMAGE. Effects of Overexposure:CORROSIVE TO TISSUE. INGEST:VOMIT, PROSTRATION,COLLAPSE,CONSTRICTIVE SCARING. INH:DAMAGE RESP TRACT Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE WORSEN. ======================= First Aid Measures ======================= First Aid:EYE:FLUSH W/PLENTY WATER FOR 15 MIN,CALL MD. SKIN:WASH AREA W/PLENTY OF WATER, THEN DILUTE VINEGAR OR FRUIT JUICE. DO NOT INDUCE VOMIT, CALL MD. INH:REMOVE FROM EXPOSURE, CALL MD. (GE MSDS REF) . ===================== Fire Fighting Measures ===================== Flash Point:NONE Extinguishing Media:NOT COMBUSTIBLE. Fire Fighting Procedures:HOT MATERIAL MAY REACT VIOLENTLY W/WATER. Unusual Fire/Explosion Hazard:MAY REACT W/CERTAIN METALS, SUCH AS ALUMINUM TO PRODUCE FLAMMABLE HYDROGEN GAS. ================== Accidental Release Measures ================== Spill Release Procedures:SWEEP UP, DILUTE & NEUTRALIZE WITH 6M-HCL IN A LARGE BUCKET. WASH TO SEWER WITH EXCESS OF WATER.(GE MSDS REF) CAUTION! AVOID DUSTING WHEN CLEANING UP. DELAY IN CLEANUP MAY ALLOW ABSORBTION OF MOISTURE FROM ATMOSPHERE & INCREASE PROBLEMS INCLEANING. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. Other Precautions:HAZ DECOMPOSITION PRODUCTS:PRODUCT WILL SLOWLY ABSORB CO2 & H20 FROM AIR, FORMING SODIUM CARBONATE.(GE MSDS REF) ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED MASK. Ventilation:MECHANICAL(GENERAL): TO KEEP BELOW TLV. Protective Gloves:RUBBER Eye Protection:GOGGLES Other Protective Equipment:RUBBER BOOTS & APRONS, EYE WASH & SAFETY SHOWER(GE MSDS REF) Supplemental Safety and Health VP:VALUE IS AT 739C;1362F. SOL IN WATER: GE MSDS REF. CONTAINER:5 LBS. SOL.IN WATER:42 GM/100 ML(MFR).FIRE & EXPLOSION INFORMATION FROM GE MSDS REF. ================== Physical/Chemical Properties ================== HCC:B1 Boiling Pt:=1390.C, 2534.F Spec Gravity:2.13 Solubility in Water:APPRECIABLE Appearance and Odor:WHITE DELIQUESCENT PELLETS. ODORLESS. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:NO ALUMINUM,STRONG ACIDS & MANY ORGANIC CHEMICALS. GE MSDS REF Stability Condition to Avoid:ABSORB CO2/H20 FROM AIR FORMING SODIUM CARBONATE(GE MSDS) Hazardous Decomposition Products:SEE OTHER PRECAUTIONS. ==================== Disposal Considerations ==================== Waste Disposal Methods:MFR RECOMMENDS TO POUR INTO LARGE TANK OF WATER & NEUTRALIZE. TRANSFER TO SEWER WITH EXCESS OF WATER. DISPOSAL METHOD MUST BE IAW FED. STATE & LOCAL CODES. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.