SIGMA CHEMICAL COMPANY -- POLYVINYLPYRROLIDONE AV MOL WT 10,000, P287 -- 6810-00N020417
===================== Product Identification =====================
Product ID:POLYVINYLPYRROLIDONE AV MOL WT 10,000, P287
MSDS Date:01/29/1990
FSC:6810
NIIN:00N020417
=== Responsible Party ===
Company Name:SIGMA CHEMICAL COMPANY
Box:14508
City:ST. LOUIS
State:MO
ZIP:63178
Country:US
Info Phone Num:800-325-3010; 314-771-5750
Emergency Phone Num:314-771-5765
CAGE:21076
=== Contractor Identification ===
Company Name:SIGMA CHEMICAL COMPANY
Address:3050 SPRUCE ST
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Phone:314-771-5765
CAGE:21076
============= Composition/Information on Ingredients =============
Ingred Name:POLY(1-VINYL-2-PYRROLIDINONE) HUEPER'S POLYMER NO.1;
(POLYVINYLPYRROLIDONE)
CAS:9003-39-8
RTECS #:TR8370000
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50:ORAL(RAT)100 GM/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED. MAY BE HARMFUL
IF INHALED OR ABSORBED THROUGH SKIN. MAY CAUSE EYE OR SKIN
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYES:IMMED FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:FLUSH WITH WATER. INHAL:REMOVE TO FRESH AIR. CALL MD.
INGEST:IMMED CALL MD .
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER SPRAY. CO2, DRY CHEMICAL POWDER, ALCOHOL OR
POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP UP, PLACE IN BAG & HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE
AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT BREATHE DUST. AVOID CONTACT
W/EYES, SKIN & CLOTHING. AVOID PROLONGED/REPEATED EXPOSURE. KEEP
TIGHTLY CLOSED. STORE IN COOL DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:OTHER PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
HCC:N1
Appearance and Odor:OFF-WHITE TO YELLOW POWDER
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE CO,
CO2 & NITROGEN OXIDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISSOLVE/MIX MATERIAL WITH COMBUSTIBLE SOLVENT &
BURN IN CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER.
OBSERVE ALL FEDERAL, STATE & LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.