WITHROW INDUSTRIAL LUBRICANTS -- 336 SEMI-SYNTHETIC COOLANT (M-16)  -- 6850-00N001329
<pre>=====================  Product Identification  =====================

Product ID:336 SEMI-SYNTHETIC COOLANT (M-16)
MSDS Date:01/01/1985
FSC:6850
NIIN:00N001329
=== Responsible Party ===
Company Name:WITHROW INDUSTRIAL LUBRICANTS
Emergency Phone Num:213-771-7000
CAGE:60200
=== Contractor Identification ===
Company Name:WITHROW INDUSTRIAL LUBRICANTS DIV OF VAN STRAATEN
Address:5511 DISTRICT BLVD
Box:City:LOS ANGELES
State:CA
ZIP:90040
Country:US
Phone:213-771-7000
CAGE:60200

=============  Composition/Information on Ingredients  =============

Ingred Name:HEXYLENE GLYCOL
CAS:107-41-5
RTECS #:SA0810000
Fraction by Wt: 1-5%
OSHA PEL:C 25 PPM
ACGIH TLV:C 25 PPM; 9192

Ingred Name:TRIETHANOLAMINE (CAS NO. 102-71-6)
CAS:102-71-6
RTECS #:KL9275000
Fraction by Wt: 5-10%

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN: ABSORPTION NOT EXPECTED TO OCCUR.
    CONTINUED CONT MAY CAUSE IRRIT. EYE: WILL CAUSE IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/H*2O FOR 15 MIN. CALL A PHYSICIAN. SKIN: WASH
    W/SOAP & H*2O. INHALATION: IF IRRITATION OCCURS, REMOVE TO FRESH
    AIR AREA & AVOID FURTHER INHAL. INGESTION: CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:CONTAINS H*2O
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:PICK UP LARGE SPILLS W/AN OIL ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DONT ADD NITRITES TO THIS FLUID. WASH
    CONTAMINATED CLOTHING BEFORE REUSE. KEEP DRUMS CLOSED WHEN NOT IN
    USE. BRING PRODUCT TO ROOM TEMP BEFORE REUSE.
Other Precautions:AVOID CONTACT W/EYES. AVOID BREATHING MISTS. DO NOT
    TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESPIRATORY EQUIPMENT
    W/TC-21C-140 (SEE SUPP DATA)
Ventilation:IF MISTING OCCURS,PROVIDE LOCAL VENTILATION
Protective Gloves:NONE REQUIRED
Eye Protection:FACE SHIELD/GOGGLES
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
PERCENT VOLATILE BY VOLUME: 80-84. RESPIRATORY PROTECTION: CARTRIDGE
    COMBINATION IF EXCESSIVE MISTING OCCURS OR IF ASSOCIATED TLV IS
    EXCEEDED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F
Spec Gravity:1.021
Evaporation Rate &amp; Reference:LIKE H*2O
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR YELLOWISH,MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,MINERAL ACIDS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:COMPLETE COMBUSTION, OXIDES OF CARBON

====================  Disposal Considerations  ====================

Waste Disposal Methods:FLUSH SPILLS INTO WASTE DISPOSAL SYSTEM.
    NON-BIODEGRADABLE COMPONENTS OF USED EMULSIONS MUST BE REMOVED
    PRIOR TO DISPOSAL. ACID-ALUM OR ALUM-POLYMERIC DEEMULSIFIERS MAY BE
    USED. WASTE DISPOSAL MUST BE  IAW FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.