ALDRICH CHEMICAL COMPANY -- ACETONE-D6, 99.5 ATOM % D 15179-3  -- 6810-00N014191
<pre>=====================  Product Identification  =====================

Product ID:ACETONE-D6, 99.5 ATOM % D 15179-3
MSDS Date:03/28/1990
FSC:6810
NIIN:00N014191
=== Responsible Party ===
Company Name:ALDRICH CHEMICAL COMPANY
Box:355
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Info Phone Num:414-273-3850
CAGE:60928
=== Contractor Identification ===
Company Name:ALDRICH CHEMICAL CO INC
Address:1001 WEST ST PAUL AVE
Box:355
City:MILWAUKEE
State:WI
ZIP:53233
Country:US
Phone:414-273-3850
CAGE:60928

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE-D6, 99.5 ATOM % D. TLV/PEL FOR ACETONE, CAS#
    67-64-1.
CAS:666-52-4
Fraction by Wt: 99.5%
OSHA PEL:750PPM;1000 PPM STEL
ACGIH TLV:750PPM,1000 PPM STEL

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAUSES SEVERE EYE IRRITATION.
    MATERIAL IS IRRITATING TO SKIN, MUCOUS MEMBRANES AND UPPER
    RESPIRATORY TRACT. CAUSES DERMATITIS. TARGET ORGANS: LIVER,
    KIDNEYS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES. ASSURE ADEQUATE FLUSHING OF EYES BY SEPARATING
    LIDS WITH FINGERS. SKIN: FLUSH WITH WATER. REMOVE AND WASH
    CONTAMINATED CL OTHING PROMPTLY. INHAL: REMOVE TO FRESHAIR. IF
    BREATHING GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT,
    GIVE OXYGEN. CALL MD. INGEST: GET MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:1F,-17C
Lower Limits:2.15%
Upper Limits:13.2%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL POWDER, ALCOHOL OR
    POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND PROTECTIVE
    CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:EXTREMELY FLAM. VAPOR MAY TRAVEL
    CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASH BACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SHUT OFF ALL SOURCES OF IGNIT. EVAC AREA. WEAR
    NIOSH/MSHA APPRVD SCBA, RUBBER BOOTS & HEAVY RUBBER GLOVES. COVER
    WITH AN ACTIVATED CARBON ABSORBENT, TAKE UP & PLACE IN CLOSED
    CNTNRS. TRANSPORT OUTDOOR S. VENT AREA & WASH SITE AFTER MATL
    PICKUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT BREATHE VAPOR. KEEP TIGHTLY
    CLOSED. KEEP AWAY FROM HEAT, SPARKS, AND OPEN FLAME. HANDLE & STORE
    UNDER NITROGEN. STORE IN COOL, DRY PLACE.
Other Precautions:DO NOT GET IN EYES, ON SKIN OR CLOTHING. AVOID
    PROLONGED OR REPEATED EXPOSURE. SEVERE EYE IRRITANT. HYGROSCOPIC.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:COMPATIBLE CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. FACESHIELD
    (8-INCH MINIMUM).
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING,
    DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:132F,56C
Melt/Freeze Pt:M.P/F.P Text:-135F,-93C
Vapor Pres:184 @ 20C
Vapor Density:2.0
Spec Gravity:0.872
Appearance and Odor:COLORLESS LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
BASES, OXIDIZING AGENTS, REDUCING AGENTS.
Stability Condition to Avoid:PROTECT FROM MOISTURE.
Hazardous Decomposition Products:TOXIC FUMES OF: CO & CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURN IN A CHEM INCINERATOR EQUIPPED WITH AN
    AFTERBURNER & SCRUBBER BUT EXERT EXTRA CARE IN IGNITING AS THIS
    MATERIAL IS HIGHLY FLAM. DISPOSE OF IN ACCORDANCE WITH FEDERAL,
    STATE, AND LOCAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.