Danger

EFFECTIVE DATE

2016-10-05

PICTOGRAMS

HMIS

HEALTH

3

FLAMMABILITY

1

PHYSICAL HAZARD

0

PERSONAL PROTECTION

Engineering Controls: Use with adequate ventilation to maintain exposure levels below the exposure limits. Respiratory Protection: In operations where exposures limits are exceeded, an approved respirator with dust/mist cartridges or supplied air respirator should be used. Respirator selection and use should be based on contaminant type, form and concentration. Follow applicable regulations and good Industrial Hygiene practice. Skin Protection: Wear butyl rubber or other impervious gloves where contact is likely. Contact your glove supplier for selection assistance. Eye Protection: Chemical safety goggles should be worn where splashing is possible.

NFPA

3

1

0

Northern Michigan University
Local data

SKU #

*This local data is shared by all revisions

Sprint Archive Fixer Remover

Danger 2016-10-05

Hazard Statements

Causes serious eye damage. May cause an allergic skin reaction. May cause allergy or asthma symptoms. or breathing difficulties if inhaled. May cause cancer. Suspected of damaging fertility or the unborn child. May cause damage to the kidneys through prolonged or repeated ingestion.

Precautionary Statements

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe mist or vapors. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves, protective clothing, eye protection, and face protection. In case of inadequate ventilation wear respiratory protection.

Manufacturer information

Name

Sprint Systems of Photography, Inc.

Phone

18002553924

Address

60 Kindergarten St.
Woonsocket, 02895

PICTOGRAMS

HMIS

HEALTH

3

FLAMMABILITY

1

PHYSICAL HAZARD

0

PERSONAL PROTECTION

Engineering Controls: Use with adequate ventilation to maintain exposure levels below the exposure limits. Respiratory Protection: In operations where exposures limits are exceeded, an approved respirator with dust/mist cartridges or supplied air respirator should be used. Respirator selection and use should be based on contaminant type, form and concentration. Follow applicable regulations and good Industrial Hygiene practice. Skin Protection: Wear butyl rubber or other impervious gloves where contact is likely. Contact your glove supplier for selection assistance. Eye Protection: Chemical safety goggles should be worn where splashing is possible.

NFPA

3

1

0

Northern Michigan University
Local data

SKU #

*This local data is shared by all revisions